Following the test fitting of the turntable, the central section track plan was drawn on two strips
of 'bake & cooking paper' taped together and then taped to the top of the baseboard. It would be ripped away
once all track is down.
The initial trackage was laid in the loco facilities area and one end of the station. As each electrofrog turnout was positioned, a hole was drilled for a turnout control rod (if or when used). Initially, turnouts will be operated directly by hand. The stock rails and frog rails opposite the turnout blades end will have insulated joiners fitted. An electrically conductive grease may be used to improve conductivity between the turnout blades and stock rails.
The initial trackage was laid in the loco facilities area and one end of the station. As each electrofrog turnout was positioned, a hole was drilled for a turnout control rod (if or when used). Initially, turnouts will be operated directly by hand. The stock rails and frog rails opposite the turnout blades end will have insulated joiners fitted. An electrically conductive grease may be used to improve conductivity between the turnout blades and stock rails.
A
sample goods shed was used for a test placement. The actual
Strahalbyn goods shed has the platform at the opposite end of the
building. More on the goods shed and other structures later.
I am happy to find this post Very useful for me, as it contains lot of information. I Always prefer to read The Quality and glad I found this thing in you post. Thanks
ReplyDeletebest cheap gaming chairs under 100 dollars
Thank you Kandy.
DeleteGraham